Solar power project Bluetti EB70 1000W Review and Gofort 200W Solar Panel

I have been researching which Solar power generator i can use as a backup power supply at home.
To cut the story short, i have chosen Bluetti EB70 1000W because this large power bank can accept solar panel, car charger and home power plug as input charger.

Do note that max input is 200W so dont bother buying any Solar Panel which exceed 200W.

There are many cheaper alternative to this but i have chosen this mainly because of the battery type. It uses ultra-stable LiFePO4 battery chemistry,2500+ life cycles !
The recharge cycle matters! and this is the same battery used in EV vehicle. So it much better compare to other types of battery.

Here are its full specifications:-

  • Massive 716Wh capacity and 1000W rated wattage
  • The ultra-stable LiFePO4 battery chemistry,2500+ life cycles
  • 2*230V AC outlets, 2*100W PD ports, 2*5V/3A USB-A ports, 2*regulated 12V/10A DC outputs, 1*12V/10A car port,1*15W wireless charging pad.
  • With max input of 200W, this power station can be fully recharged in 3-4 hrs with solar panels (OCV 12-28V, 200W)
  • It can also get fully recharged from an AC wall outlet in 3-4 hrs or a 12V car port in 7-8 hrs.
Here are a few quick takeaways. It is good for charging low watt devices, eg handphone, small led light, small usb fan. But When i tested it with a full desk fan which operates at 50W , the battery cannot last more than 4 hours, it is far from what is being advertise.

Charging this using the Gofort 200W solar power is quick. It takes me 4 to 5 hours for a full charge depending on how sunny it is. So far the highest watt generated from the solar panel is 111W

Overall i would say this is a good investment if you like to go for camping. It can easily last a day if you do not plug it to a microwave ! 

Let me know what you want to know about this gadgets in the comment below and i will try to answer it. :)

Comments

Post a Comment

Popular posts from this blog

How to disable Trend Micro OfficeScan using cmd.

Sometimes i find the Trend Micro OfficeScan is annoying when u wanna download some stuff from some cracks sites..so to disable the real time scan using command prompt, you can follow this guide.. 1. Start command prompt. Start->run-> cmd 2. Type "net stop tmlisten" 3. Type "net stop ntrtscan" and voila you Trend Micro OfficeScan real time scan is disable!!
Read more

Fake torrent from www.YayMovies.com .. Beware !!! It is a Scam !!

Have u ever downloaded a torrent from www.YayMovies.com The file will be password protected..and inside there is a readme which states the following... >>> Hello, This video is password protected to stop automated leeching and detection. To get your password, Please visit: www.YayMovies.com We apologize for the inconvenience.   --------- Note: The password is case sensitive. So please enter is exactly as it is displayed. Have a nice day :) ---------- It's a scam. Makes you choose one of the 6 or 7 quizzes. After ask for cellphone #. With that, they begin to bill you a monthly service. Heres the details---------------Minimum age restrictions may apply. You must be at least 18 to participate in the following states: Florida.With Playphone Platinum Plus Subscription Plan you will get unlimited credits (10 ringtone credits and unlimited credits for video's, games and wallpapers) every month for $14.99/month and 2 Playphone Backstage Alerts. To cancel text "STOP",...
Read more

Zishan Z1 firmware Update and Manual

I found out Zishan has released a new firmware for Z1 player. It supports three new playback modes. download here.. The update is simple. All you need is the ZiShan_Z1_0.2.zip and a TF card. I used a 32GB TF card in FAT32 format. 1) Turn off Z1 player; 2) Extract app.bin from ZiShan_Z1_0.2.zip, and put it in the root directory of the TF card; 3) Insert the TF card into the player; 4) Turn on the Z1 player. The LED light will be on for 3 seconds and then blink ultra-fast for around 5 seconds. (Done). 5) Remove the file app.bin in the card. What's new in v0.2: 1) Add 180 EQ settings. (WTF...it's a screen-less player.) 2) Add 3 playback modes: Repeat, Shuffle and Default. (Very useful for me.) 3) Fix a DSD problem. How to choose playback modes: Press 'Prev' for a few seconds until the LED light blinks faster than normal, then release. And: a) Press 'Prev' to choose Repeat track mode. b) Press 'Stop' to choose Shuffle all tracks mode. c)...
Read more